0 items: $0.00

Call Us:336.644.8668

Want to Run COIL ON PLUG Ignition?

Search results for '30 point'

35 Item(s)

per page

Grid  List 

Set Ascending Direction
  • Pro-M EFI Engine Management System for the Ford FR500C Mustang

    Pro-M EFI Engine Management System for the Ford FR500C Mustang


    The all new Pro-M EFI Engine Management System for the Ford FR500C Mustang includes our new fully programmable Pro-M EFI processor, tuning software, USB connection for laptop tuning and reconfigured FR500C ECU harness. Learn more . . .
    $2,449.95
  • Mallory Promaster e Series Ignition Coils

    Mallory Promaster E Series Ignition Coil

    Mallory's Promaster e Series coils are designed to meet today's specialized ignition requirements. They offer a faster rise time and increased spark duration (compared to stock), and a high-efficiency E-core design for maximum performance. Also featured are an extruded aluminum mount for great heat dissipation, mounting ease, and good looks, and a plug-in style wiring connector for easier installation.
    $79.99
  • 1996 - 1998 Mustang GT

    Pro-M EFI Engine Management System for the 1996 - 1998 Mustang


    The all new Pro-M EFI Engine Management System for the 1996 - 1998 Mustang includes our new fully programmable Pro-M EFI processor, tuning software, USB connection for laptop tuning and1996 - 1998 Mustang specific engine management harness. Learn more . . .
    $1,999.95
  • 1994 1995 Mustang GT

    Pro-M EFI Engine Management System for the 1994 - 1995 Mustang (SN95)


    The all new Pro-M EFI Engine Management System for the SN95 Mustang includes our new fully programmable Pro-M EFI processor, tuning software, USB connection for laptop tuning and SN-95 Mustang specific engine management harness. Learn more . . .
    $1,999.95
  • LC2 Series Digital WideBand Controller

    Innovate Motorsports LC2 Digital Wideband Controller with O2 Sensor

    Innovate Motorsports LC2: These wide band O2 sensors operate over a much broader range of Air/Fuel ratio than the conventional O2 sensors, which allows for more precise fuel control over a broader range of operating conditions. They are worth the money. You'll find that the Pro-M EFI harness has a connector dedicated to wiring for the wide bands. And if you purchase the wide bands as part of your EFI package, you'll get a harness pigtail that plugs into the harness, and makes wiring the wide bands a snap.


    This is a single O2 kit.
    $194.99
  • Pro-M Racing 260, 289, 302, 331, 347 Ford EFI Intake Manifold

    Pro-M EFI 260, 289, 302, 331, 347 Ford EFI Intake Manifold

    The Pro-M EFI 260, 289, 302, 331, 347 Ford EFI Intake Manifold was designed to maximize power and fuel economy. It has the fuel injector bosses precisely positioned and machined for the correct fuel spray pattern location and maximum power
    $449.99
  • Pro-M EFI Buick 400, 430, 455 Complete Mass Air Sequential Port EFI System

    400, 430, 455 Buick Complete Mass Air Sequential Port EFI System


    The Pro-M EFI Buick 400, 430, 455 Complete Mass Air Sequential Port EFI System is hands down the best aftermarket EFI system in the industry! Featuring the all new programmable Pro-M EFI Engine Management Computer! Learn More
  • Pro-M Racing On Throttle Body Mass Air Meter

    Pro-M Racing Stage 1 On Throttle Body Mass Air Meter

    The Pro-M Racing Stage 1 On Throttle Body Mass Air Meter is custom designed to work with the Pro-M Racing 1000 CFM Throttle Body. The Stage 1 Meter is calibrated for use with up to 30# / HR fuel injectors and works with the Pro-M EFI Engine Management System.
  • 3.5" WAVE Pro-Tube

    3.5" WAVE Pro-Tube - FREQUENCY Style

    Pro-M Racing 3.5 inch WAVE Pro-Tube


    The 3.5" WAVE Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.

    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $374.99
  • 3" WAVE Pro-Tube

    3" WAVE Pro-Tube - FREQUENCY Style

    Pro-M Racing 3 inch WAVE Pro Tube


    The 3" WAVE Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.

    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $374.99
  • 3.5" Slot Style Pro-Tube

    3.5" Slot Style Pro-Tube

    Pro-M Racing 3.5 inch Slot Style Pro Tube is capable of handling 1100 flywheel HP.


    The 3.5" Slot Style Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" Slot Style Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.


    The Pro-M 3.5" Slot Style Pro-Tube mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
  • 3" Slot Style Pro-Tube

    3" Slot Style Pro-Tube

    Pro-M Racing 3 inch Slot Style Pro Tube is capable of handling 800 flywheel HP.


    The 3" Slot Style Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" Slot Style Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.


    The Pro-M 3.5" Slot Style Pro-Tube mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
  • Pro-M Slot Style Nissan Mass Air Sensor

    Pro-M Slot Style Nissan Mass Air Sensor

    Pro-M “Slot Style” Nissan Mass Air Sensor


    The Pro-M Nissan Slot Style Pro-Tube mass air sensor comes with a 30 point transfer function sheet at NO additional charge!
    $324.99
  • Pro-M Wave for 2011 - 2018 Fords - Frequency Type Sensor

    Pro-M Wave for 2011 - 2018 Fords - Frequency Type Sensor

    Introducing the all new PRO-M WAVE!


    The PRO-M WAVE is the newest creation in after market Mass Air Sensors by Pro-M Racing. If you are looking for versatility, performance, accuracy and quality then the PRO-M WAVE is what you have been looking for.


    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $299.99
  • SCT BA 3000

    Repairs for Other Brands

    If the electronics on your meter assembly are physically damaged, or are no longer working, you can send the meter in for repair. The electronics will be replaced and then calibrated for your application. If your electronics are functioning and you simply need a recalibration please, Click Here!



    We will repair any FORD, PMAS, Granatelli, BBK, Summit Racing, SCT and Sniper meter, new or old. Please Note we will NOT repair C&L, Vortec or GM style meters meters.



    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.



    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.



    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.



    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.









    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    We do not warranty repairs for other brands!

    $200.00
  • Pro-M Meter Repair

    Pro-M Meter Repair

    If the electronics on your meter assembly are physically damaged, or are no longer working, you can send the meter in for repair. The electronics will be replaced and then calibrated for your application. If your electronics are functioning and you simply need a recalibration please, Click Here!



    Repairs are handled directly through Pro-M. Please DO NOT send your meter to a distributor to be repaired.



    We WILL Repair any Pro-M meter, new or old. Older Pro-M meters will have "Pro-Flow" and/or "Professional Flow Technologies" on the lid. These are old Pro-M meters, and we DO offer Repairs on these.



    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.



    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.



    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.



    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.









    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    $175.00
  • SCT BA 3000

    Recalibrations for Other Brands

    If you are changing injector size, or installing your mass air meter into a different vehicle, you will need to get your meter recalibrated.


    We will recalibrate any FORD, PMAS, BBK, Summit Racing, SCT and Sniper meter, new or old. Please Note we will NOT recalibrate C&L, Granatelli or Vortec meters.


    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.


    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.


    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.


    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.


    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.








    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is unable to be recalibrated you will still be charged $50 for the testing unless you are purchasing a repair.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    We do not warranty recalibrations for other brands!

    $150.00
  • Pro-M Recalibration

    Pro-M Meter Recalibration

    If you are changing injector size, or installing your mass air meter into a different vehicle, you will need to get your meter recalibrated.


    Recalibrations are handled directly through Pro-M Racing. Please DO NOT send your meter to a distributor to be recalibrated.


    We WILL recalibrate any Pro-M meter, new or old. Older Pro-M meters will have "Pro-Flow" and/or "Professional Flow Technologies" on the lid. These are old Pro-M meters, and we DO offer recalibration for these.


    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.


    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.


    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.


    3) Ship your meter (the whole meter not just the electronic sensor) to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.








    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is unable to be recalibrated you will still be charged $50 for the testing unless you are purchasing a repair.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    $100.00
  • Pro-M Slot Style Mass Air Sensor

    Pro-M Slot Style Mass Air Sensor

    Pro-M "Slot Style" Mass Air Sensor


    The Pro-M "Slot Style" mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
    $199.99
  • 75 lb/hr Delphi Fuel Injector

    75 lb/hr Fuel Injector EV1 Style E85 Compatible

    High Performance 75 pound per hour High Impedance EV1 style fuel injector.


    Horsepower: 950 - 1100 Flywheel Horsepower
  • 4 to 6 Pin Adapter

    4 to 6 Pin Adapter

    This adapter allows use of more modern mass air meters in earlier vehicles. One end connects to later model meters with 4 and 6 pin rectangular connectors. The other end connects to the 4 pin oval harness connector found in earlier Ford vehicles. This adapter is far superior, cleaner looking, and much more reliable than the goofy pigtail adapters offered by our competition.
  • 3" Pro-Tube

    3" Pro-Tube

    Pro-M Racing 3 inch Pro Tube


    The 3" Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.
    $314.99
  • Pro-M 80

    Pro-M 80

    The Pro-M 80mm High Flow Mass Air Meter is our flagship mass air meter. It is by far the most popular mass air meter ever offered. The Pro-M 80 is built out of a high quality polymer and shipped with it's lifetime filter. Watch a video of the Pro-M 80
    $309.99

35 Item(s)

per page

Grid  List 

Set Ascending Direction