|
Create
a Part Number For Your Meter
Ford vehicles
(GM Vehicles, Please
See Our GM
Application Page)
To order your new mass air meter, you will need a part
number. Our numbering system will allow you to order any
mass air meter, with any calibration. Follow the steps
below to create a part number. If you are not sure which
housing best suits your needs, please call for help.
1.1.
Select a mass air meter. Each mass air meter design
has a corresponding four digit code. This four digit code
will become the first portion of your part number. Please
select a meter from the list below. If you do not know
which meter best suits your needs, please call for help.
| METER
HOUSING |
CODE |
TYPICAL
APPLICATION |
|
|
|
|
|
75MM Plastic Bullet (un-flanged)
|
75BP
|
88-93 Mustang
|
|
75MM Plastic Flanged Bullet
|
75FP
|
94-95 Mustang
|
|
75MM Chrome Bullet (un-flanged
|
75BC
|
88-93 Mustang
|
|
75MM Chrome Flanged Bullet
|
75FC
|
94-95 Mustang
|
|
80MM Pro-M
|
80PP
|
Universal High Flow
|
|
92MM Pro-M
|
92PA
|
Universal High Flow
|
|
85MM Aluminum Flanged
|
85FA
|
96-2004 Mustang/Truck
|
|
95MM Aluminum Flanged
|
95FA
|
03-04 Cobra/01-04 Lightning
|
|
3" Pro-Tube
|
30PT
|
Universal Blow Through
|
|
3.5" Pro-Tube
|
35PT
|
Universal Blow Through
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2. Select
a calibration code. The calibration code will be
used to properly calibrate your new mass air meter for
the intended vehicle. This calibration code will become
the middle portion of your part number. Please select
a code from the list below. (Note:
If you do not see your vehicle listed, please call. We
likely have your calibration.)
Ford Cars
|
VEHICLE
|
CALIBRATION CODE
|
|
|
|
|
88-93 Mustang GT/LX 5.0
|
M93
|
|
93 Mustang Cobra
|
SVT93
|
|
91-93 Mustang 2.3 4 cyl (will
require modification)
|
4M93
|
|
94-95 Mustang GT/LX
|
M95
|
|
94-95 Mustang Cobra
|
SVT95
|
|
96-98 V6 Mustang
|
6M98
|
|
96-98 Mustang GT
|
M98
|
|
96-98 Mustang Cobra
|
SVT98
|
|
99-00 V6 Mustang
|
6M00
|
|
99-early 02 Mustang GT and Bullitt
|
M01
|
|
99-01 Mustang Cobra
|
SVT01
|
|
01-04 V6 Mustang
|
6M04
|
|
Late 02-04 Mustang GT
|
M04
|
|
03-04 Mustang Mach 1
|
SVT01
|
|
03-04 Cobra
|
SVT04
|
|
05-08 Mustang GT
|
M08
|
|
07-08 Shelby GT500 includes KR
|
SVT08
|
|
08 Mustang Bullitt
|
MB08
|
|
91-95 T-Bird Super Coupe
|
SC95
|
|
96-97 T-Bird, Cougar 4.6
|
TB97
|
|
96-99 Crown Vic, Marquis, Towncar
|
CV99
|
|
03-04 Mercury Marauder
|
MA04
|
|
92-98 Australian Falcon (with
oval connector)
|
AF98
|
|
92-98 Australian Falcon with GT40
engine
|
AFSVT98
|
|
98-03 Australian Falcon
|
AF03
|
|
|
|
Ford Trucks
|
VEHICLE
|
CALIBRATION CODE
|
|
|
|
|
90-91 Ranger 2.3
|
4M93
|
|
90-94 Ranger 4.0 / 92-94 Explorer
4.0
|
RA94
|
|
95-00 Ranger 4.0 / 97-98 Explorer
4.0
|
RA00
|
|
94-97 5.0/5.8 Truck (specify oval
or rect conn)
|
T95
|
|
96-98 4.6/5.4 Truck
|
T98
|
|
96-98 7.5L Truck
|
75T98
|
|
99-03 4.6/5.4/6.8(V-10) Truck
|
T03
|
|
99-00 Lightning Truck
|
LTG00
|
|
01-04 Lightning/Harley Truck
|
LTG04
|
|
05-08 4.6/5.4 Fullsize Van
|
V08
|
|
|
|
Specialty
Calibrations for Tuners
If you are using tuning software, this
may be a good option. The transfer function for our "Universal
Tuner Calibration" is set up so that your meter will
never "Peg", and it will never drop below minimum
voltage. As always, a meter ordered with our "Universal
Tuner Calibration" will be supplied with a transfer
function sheet. The benefit of the "Universal Tuner
calibration" is the fact that it can be used with
any vehicle, with any size injector, whether it has forced
induction, or is naturally aspirated. It is truly a "one
calibration fits all" transfer function. If you are
using tuning software, you will never need to recalibrate
your meter again.
Pro-M Universal Tuner Calibration
- Use calibration code "PROM"
Sniper Tuning Applications:
This calibration matches the transfer
function provided with the Sniper Tuning software for
the Bazooka 3000 meter.
Sniper Bazooka 3000 - Use calibration
code "Bazooka"
SCT Tuning
Applications:
These calibrations match the transfer functions provided
in the SCT software.
SCT BA2400 -- Use calibation code
BA2400
SCT BA2600 -- Use calibation code BA2600
SCT BA2800 -- Use calibation code BA2800
SCT BA3000 -- Use calibation code BA3000
3.
Select a fuel injector size. You may select
any size fuel injector. This will become the last portion
of your part number.
4.
Cold air tune? Please see our Facts
About Cold Air Tunes page for information concerning
cold air kits. If, after reading this information, you
want your new meter calibrated for use with a cold air
kit, Please put a "C" at the end of your part
number.
Examples: A 75MM chrome Bullet for a 93 Mustang with 24# injectors, and a cold air kit would be part number 75BC-M93-24C.
A Pro-M 80 for a 99 Ford Truck with 30# injectors, and no cold air kit would be part number 80PP-T03-30
|
