0 items: $0.00

Call Us:336.644.8668

Want to Run COIL ON PLUG Ignition?

Mass Air Meters

22 Item(s)

per page

Grid  List 

Set Descending Direction
  • Pro-M Drop-In Sensor

    Pro-M Drop-In Sensor

    Use the Pro-M Drop-In Sensor with our Drop-In Weld-On Flange to create your own custom mass air meter assembly. The perfect option for customers with custom tubes or forced induction! Learn More
    $174.95
  • Pro-M Slot Style Mass Air Sensor

    Pro-M Slot Style Mass Air Sensor

    Pro-M "Slot Style" Mass Air Sensor


    The Pro-M "Slot Style" mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
    $199.99
  • Pro-M FORD 6.0L Diesel Sensor

    Pro-M FORD 6.0L Diesel Sensor

    The Pro-M 2003 - 2007 FORD 6.0L Diesel Sensor was designed to break through the limitations of the stock sensor. When used in the stock air housing you will quickly realize and increase in throttle response (less turbo lag), increase in Miles Per Gallon (MPG) and increased torque. Learn More
    $199.99
  • 75mm Flanged Bullet

    75mm Flanged Bullet

    The Pro-M 75mm Flanged Bullet is a direct replacement for the 94-95 Mustang (Forth Generation / Fox-4 / SN-95), 94-96 5.0 and 5.8 trucks, and any other Ford vehicle originally equipped with a 70mm flanged housing. Learn More
    $209.99
  • Pro-M Racing 75mm Bullet

    75MM Plastic Bullet (un-flanged)

    The Pro-M 75mm unflanged Bullet is a direct replacement for the 88-93 5.0 Mustang (Fox Body / Third Generation), as well as any other Ford vehicle originally equipped with a 55 or 70mm unflanged Mass Air Meter housing.
    $209.99
  • 85MM Aluminum Flanged

    85MM Aluminum Flanged

    The 85mm Flanged Mass Air Meter is a direct replacement for the 80mm OEM meter found in 96-2004 Mustangs and 97-03 Ford trucks.
    $264.99
  • 95MM Aluminum Flanged

    95MM Aluminum Flanged

    The 95mm Flanged Mass Air Meter is a direct replacement for 03-04 Cobra Mustangs, 01-03 Lightning trucks, and Harley Davidson trucks. The 95mm can also be used in the 85mm applications.
    $294.99
  • Pro-M Wave for 2011 and up Mustang - Frequency Type Sensor

    Pro-M Wave for 2011 and up Mustang - Frequency Type Sensor

    Introducing the all new PRO-M WAVE!


    The PRO-M WAVE is the newest creation in after market Mass Air Sensors by Pro-M Racing. If you are looking for versatility, performance, accuracy and quality then the PRO-M WAVE is what you have been looking for.


    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $299.99
  • Pro-M 80

    Pro-M 80

    The Pro-M 80mm High Flow Mass Air Meter is our flagship mass air meter. It is by far the most popular mass air meter ever offered. The Pro-M 80 is built out of a high quality polymer and shipped with it's lifetime filter.
    $309.99
  • 3.5" Pro-Tube

    3.5" Pro-Tube

    Pro-M Racing 3.5 inch Pro Tube


    The 3.5" Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body.
    $314.99
  • 3.5" Slot Style Pro-Tube

    3.5" Slot Style Pro-Tube

    Pro-M Racing 3.5 inch Slot Style Pro Tube is capable of handling 1100 flywheel HP.


    The 3.5" Slot Style Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" Slot Style Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.


    The Pro-M 3.5" Slot Style Pro-Tube mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
  • 3" Pro-Tube

    3" Pro-Tube

    Pro-M Racing 3 inch Pro Tube


    The 3" Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.
    $314.99
  • 3" Slot Style Pro-Tube

    3" Slot Style Pro-Tube

    Pro-M Racing 3 inch Slot Style Pro Tube is capable of handling 800 flywheel HP.


    The 3" Slot Style Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" Slot Style Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.


    The Pro-M 3.5" Slot Style Pro-Tube mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
  • Pro-M Slot Style Nissan Mass Air Sensor

    Pro-M Slot Style Nissan Mass Air Sensor

    Pro-M “Slot Style” Nissan Mass Air Sensor


    The Pro-M Nissan Slot Style Pro-Tube mass air sensor comes with a 30 point transfer function sheet at NO additional charge!
    $324.99
  • GM 85mm 5 Pin Meter

    GM 85mm 5 Pin Meter

    Pro-M Racing, LLC. mass air meters for GM applications appear to be exactly the same product that you have seen advertised by other manufactures. All aftermarket manufactures (Pro-M Racing, LLC. included) start with the same production GM meter. The entire housing is machined, allowing it to flow more air than the stock meter. This is where the similarities end. Modifying the meter housing allows the meter to flow more air, but in the process, the calibration of the meter is thrown way off.

    $334.99
  • GM 75mm 3 Pin Meter

    GM 75mm 3 Pin Meter

    Pro-M Racing, LLC. mass air meters for GM applications appear to be exactly the same product that you see advertised elsewhere. All aftermarket manufactures (Pro-M Racing, LLC. included) start with the same production GM meter. The ends are removed from the production meters, then the center section (the part that contains the electronics) is machined to allow more air flow, then new larger diameter ends are installed. The result is an assembly that flows more air, but in the process, the calibration of the meter is thrown way off. Other manufacturers simply ship them with the calibration off. Every Pro-M Racing, LLC. meter is calibrated to match the original meter's calibration. These meters can simply be installed in place of your original meter, with no modification to the computer, allowing instant results, with none of the hassles associated with aftermarket computer tuning. This is a feature you will only find in a Pro-M Racing, LLC. meter. Every Pro-M mass air meter plugs into your vehicle's harness connector without modification

    $334.99
  • 3" WAVE Pro-Tube

    3" WAVE Pro-Tube - FREQUENCY Style

    Pro-M Racing 3 inch WAVE Pro Tube


    The 3" WAVE Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.

    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $374.99
  • 3.5" WAVE Pro-Tube

    3.5" WAVE Pro-Tube - FREQUENCY Style

    Pro-M Racing 3.5 inch WAVE Pro-Tube


    The 3.5" WAVE Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.

    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $374.99
  • Pro-M 92

    Pro-M 92

    The Pro-M 92mm High Flow Mass Air Meter is the undisputed "Bad-Ass" of mass air meters. Forged out of high quality cast aluminum and shipped with it's lifetime filter.
    $394.99
  • Pro-M Racing On Throttle Body Mass Air Meter

    Pro-M Racing Stage 2 On Throttle Body Mass Air Meter

    The Pro-M Racing Stage 2 On Throttle Body Mass Air Meter is custom designed to work with the Pro-M Racing 1000 CFM Throttle Body. The Stage 2 Meter is calibrated for use with 36# / HR fuel injectors and larger, and works with the Pro-M EFI Engine Management System.
  • Pro-M 117 with conical filter

    Pro-M 117

    The Pro-M 117mm High Flow Mass Air Meter is the "LARGEST" mass air meter made. With a bell mouth inlet and 5 inch outlet, nothing comes close! Forged out of high quality cast aluminum and shipped with it's lifetime filter. Used by Stuska Dynamometers around the country!
    $449.99
  • Pro-M Racing On Throttle Body Mass Air Meter

    Pro-M Racing Stage 1 On Throttle Body Mass Air Meter

    The Pro-M Racing Stage 1 On Throttle Body Mass Air Meter is custom designed to work with the Pro-M Racing 1000 CFM Throttle Body. The Stage 1 Meter is calibrated for use with up to 30# / HR fuel injectors and works with the Pro-M EFI Engine Management System.

22 Item(s)

per page

Grid  List 

Set Descending Direction