0 items: $0.00

Call Us:336.644.8668

Want to Run COIL ON PLUG Ignition?

Pro-M Wave for 2011 - 2017 Fords - Frequency Type Sensor

Availability: In stock

$299.99

Quick Overview

Introducing the all new PRO-M WAVE!


The PRO-M WAVE is the newest creation in after market Mass Air Sensors by Pro-M Racing. If you are looking for versatility, performance, accuracy and quality then the PRO-M WAVE is what you have been looking for.


The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!

* Required Fields

$299.99

Pro-M Wave for 2011 - 2017 Fords - Frequency Type Sensor

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

  PRO-M WAVE!

The PRO-M WAVE is the newest creation in after market Mass Air Sensors by Pro-M Racing. If you are looking for versatility, performance, accuracy and quality then the PRO-M WAVE is what you have been looking for.

The PRO-M WAVE can be used as a direct replacement for the original sensor used in all 2011 - 2074 Ford products and many other vehicles using frequency type Mass Air Sensors both foreign and domestic. The PRO-M WAVE has 2.5 times more range than the stock sensor. The PRO-M WAVE's extended range allows it to be used with engines with as much as 800 flywheel horsepower, while still using the stock air cleaner box. This sensor absolutely will not peg, yet still has excellent resolution.

The PRO-M WAVE can also be used as an addition to fabricated ducting. Due to its design, this sensor can easily be added to any piece of existing ducting. It can be used in both blow through and draw through applications. The PRO-M WAVE is calibrated so that its range just slightly exceeds that of the ducting in which it is installed. This means that the sensor cannot peg, yet still has excellent resolution. Tuning is required, and a 40 point transfer function sheet is included. The transfer function sheet shows the transfer function that the PRO-M WAVE will have in whatever diameter duct you've chosen. It will support up to 800hp in a 3in diameter tube, up to 1100hp in a 3.5in diameter tube, and up to 1500hp in a 4in diameter tube.

The PRO-M WAVE is far superior to range extenders used with the stock or competitor's sensor. For more information on the limitations of range extenders, please see our range extender facts page.

Wire Diagram:
Pin 1(F) = Not Used
Pin 2(E) = Intake Air Temperature (IAT)
Pin 3(D) = 12V Power
Pin 4(C) = Ground
Pin 5(B) = Mass Air Signal
Pin 6(A) = Not Used

NOTE: WAVE sensors require the customer to enter the transfer function sheet (included) data into the ECM.