0 items: $0.00

Call Us:336.644.8668

Want to Run COIL ON PLUG Ignition?

Meter Recalibration & Repair

8 Item(s)

per page

Grid  List 

Set Descending Direction
  • Duplicate 9 Point Transfer Function Sheet

    9 Point to 30 Point Transfer Function Sheet Conversion

    Ordering a 9 Point to 30 Point Transfer Function Sheet Conversion is simple! All you need to do is complete this order and fax (508.637.1093) or email (tech@promracing.com) your current 9 point transfer function sheet to us. You will then be emailed the 30 point transfer function sheet.

    If you don't have your 9 point transfer function sheet, don't worry! Just select the option below for a duplicate 9 point transfer function sheet.
    $50.00
  • Duplicate 9 Point Transfer Function Sheet

    Duplicate 9 Point Transfer Function Sheets

    Have you lost your transfer function sheet? Every meter built by Pro-M Racing since 2006 has a unique serial number. That serial number will start with the letters "VM", followed by 4 numbers. Please enter those 4 numbers in the space below. Your duplicate flow sheet will be set to you via email.



    This service is only available for a 9 point transfer function sheet.


    $25.00
  • Pro-M EFI T-Shirt

    Pro-M EFI T-Shirt

    Look stylish and show off this exclusive Pro-M EFI T-Shirt to your friends at the track or the grocer store. High quality and available in 4 sizes, featuring the Pro-M EFI logo on the front and back!
    $9.99
  • Pro-M Meter Function Test

    Pro-M Meter Function Test

    Meter Function Tests are handled directly through Pro-M. Please DO NOT send your meter to a distributor to be tested.
    $50.00
  • Pro-M Recalibration

    Pro-M Meter Recalibration

    If you are changing injector size, or installing your mass air meter into a different vehicle, you will need to get your meter recalibrated.


    Recalibrations are handled directly through Pro-M Racing. Please DO NOT send your meter to a distributor to be recalibrated.


    We WILL recalibrate any Pro-M meter, new or old. Older Pro-M meters will have "Pro-Flow" and/or "Professional Flow Technologies" on the lid. These are old Pro-M meters, and we DO offer recalibration for these.


    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.


    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.


    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.


    3) Ship your meter (the whole meter not just the electronic sensor) to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number when we ship your meter. This is your notification that the meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.








    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is unable to be recalibrated you will still be charged $50 for the testing unless you are purchasing a repair.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    $100.00
  • Pro-M Meter Repair

    Pro-M Meter Repair

    If the electronics on your meter assembly are physically damaged, or are no longer working, you can send the meter in for repair. The electronics will be replaced and then calibrated for your application. If your electronics are functioning and you simply need a recalibration please, Click Here!



    Repairs are handled directly through Pro-M. Please DO NOT send your meter to a distributor to be repaired.



    We WILL Repair any Pro-M meter, new or old. Older Pro-M meters will have "Pro-Flow" and/or "Professional Flow Technologies" on the lid. These are old Pro-M meters, and we DO offer Repairs on these.



    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.



    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.



    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.



    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number when we ship your meter. This is your notification that the meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.









    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    $175.00
  • SCT BA 3000

    Recalibrations for Other Brands

    If you are changing injector size, or installing your mass air meter into a different vehicle, you will need to get your meter recalibrated.


    We will recalibrate any FORD, PMAS, BBK, Summit Racing, SCT and Sniper meter, new or old. Please Note we will NOT recalibrate C&L, Granatelli or Vortec meters.


    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.


    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.


    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.


    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.


    4) You will receive a UPS tracking number when we ship your meter. This is your notification that the meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.








    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is unable to be recalibrated you will still be charged $50 for the testing unless you are purchasing a repair.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    We do not warranty recalibrations for other brands!

    $150.00
  • SCT BA 3000

    Repairs for Other Brands

    If the electronics on your meter assembly are physically damaged, or are no longer working, you can send the meter in for repair. The electronics will be replaced and then calibrated for your application. If your electronics are functioning and you simply need a recalibration please, Click Here!



    We will repair any FORD, PMAS, Granatelli, BBK, Summit Racing, SCT and Sniper meter, new or old. Please Note we will NOT repair C&L, Vortec or GM style meters meters.



    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.



    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.



    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.



    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number when we ship your meter. This is your notification that the meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.









    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    We do not warranty repairs for other brands!

    $200.00

8 Item(s)

per page

Grid  List 

Set Descending Direction