0 items: $0.00

Call Us:336.644.8668

Want to Run COIL ON PLUG Ignition?

Wiring & Adapters

18 Item(s)

per page

Grid  List 

Set Descending Direction
  • 4 to 6 Pin Adapter

    4 to 6 Pin Adapter

    This adapter allows use of more modern mass air meters in earlier vehicles. One end connects to later model meters with 4 and 6 pin rectangular connectors. The other end connects to the 4 pin oval harness connector found in earlier Ford vehicles. This adapter is far superior, cleaner looking, and much more reliable than the goofy pigtail adapters offered by our competition.
  • 6pin 4 wire Pigtail

    6 Pin 4 Wire Pigtail

    Pro-M 6 Pin to 4 Wire Connector


    Wiring harness repair pigtail.
    $24.99
  • 6 Pin 6 Wire Pigtail

    6 Pin 6 Wire Pigtail

    Pro-M 6 Pin to 6 Wire Connector



    Wiring harness repair pigtail.
    $24.99
  • 6 to 6 pin Connector

    6 to 6 pin Connector

    Pro-M 6 to 6 pin Connector


    Allows use of any Pro-M meter (other than the Pro-M 80/92) in 2005 and newer ford vehicles without modifying the vehicle harness.


    Note: Not required for the Slot-In sensor.
    $49.99
  • 6 to 6 pin Connector with IAT

    6 to 6 pin Connector with IAT

    Pro-M 6 to 6 pin connector with IAT (Intake Air Temperature)



    Allows use of the Pro-M 80 / Pro-M 92 meters in any 2005 and newer Ford vehicles. This is a direct plug in. No need to modify the vehicle harness.

    Note: Requires use of external IAT sensor (Standard Motor Products part number AX31)
    $49.99
  • Check Engine Light

    Check Engine Light Kit for 87-88 Ford Mustang

    The 87-88 Ford Mustang is not equipped with a check engine light. Use this kit with our Pro-M Engine Management Systems to add the check engine light functionality.
    $39.99
  • Frequency to Voltage Converter

    Frequency to Voltage Converter

    Frequency to Voltage Converter
    $150.00
  • Heavy Gauge Fuel Pump Pigtail For 86-97 Mustangs

    Heavy Gauge Fuel Pump Pigtail For 86-97 Mustangs

    The Pro-M Racing Fuel Pump Pigtail is intended for use with high volume “In Tank” fuel pumps, and heavy duty wiring kits for those pumps. The pigtail uses 12 gauge wire which allows you to use the proper gauge wire to power your fuel pump, rather than splicing large wire to the small wires used on the original fuel pump harness connector.
    $39.99

18 Item(s)

per page

Grid  List 

Set Descending Direction