0 items: $0.00

Call Us:336.644.8668

Want to Run COIL ON PLUG Ignition?

4.6 SOHC Complete Mass Air Sequential Port EFI System

Availability: In stock

$4,849.95

Quick Overview


The Pro-M EFI 4.6 SOHC Complete Mass Air Sequential Port EFI System is hands down the best aftermarket EFI system in the industry! Featuring the all new programmable Pro-M EFI Engine Management Computer! Learn More

Need help finding your Bore? (Click Here)

Maximum number of characters: 5

Need help finding your Stroke? (Click Here)

Maximum number of characters: 5

Maximum number of characters: 4

Read About the Innovate MTX-L, LC2 or DLG-1 Wide Band O2 Sensors.

Read About the Pro-M EFI Coil On Plug Ignition System

Read About Our Complete Fuel Suppy Systems. (Click Here)

* Required Fields

$4,849.95

4.6 SOHC Complete Mass Air Sequential Port EFI System

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 4.6 SOHC Complete Mass Air Sequential Port EFI System
  • Pro-M EFI Tuning Software
  • Pro-M EFI 351W Tuning Software
  • Pro-M EFI 427 Windsor Tuning Software
  • Pro-M EFI Universal HotRod Wiring Harness
  • Pro-M EFI USB ODB II Box
  • Pro-M EFI Engine Management Computer for Fox Body Mustang
  • Pro-M EFI Engine Management Computer for Fox Body Mustang

Details

 

Pro-M EFI 4.6 SOHC Complete Mass Air Sequential Port EFI System


The Pro-M EFI 4.6 SOHC Kit Comes Complete With The Following:

All new laptop tunable Pro-M EFI Engine Management Computer. Shipped with the Pro-M EFI base tune right out of the box! This computer is also water and shock proof! Learn More . . .
Pro-M EFI patented tuning software and USB cable for easy laptop tuning via the OBD II connector!
Four Barrel Single Plane Edelbrock Victor Jr Intake Manifold.
Pro-M EFI custom 1000 CFM 4 bbl throttle body. It features all aluminum and stainless steel construction, sealed ball bearings on the throttle shafts, and progressive linkage. Comes complete with idle control motor, throttle position sensor and 3 vacuum ports for your fuel pressure regulator, PCV valve, power brake booster, etc. This is absolutely the finest 4 bbl throttle body on the market!
Jumbo aluminum fuel rails and mounts. Rails have 9/16" diameter bores providing excellent flow and dampening characteristics.
Pro-M EFI custom compact high flow patented mass air meter. The Pro-M Racing on Throttle Body mass air meter is concealed within the air cleaner of your choice to maintain the vintage look! Not wanting the classic look? No problem just select one of the other Pro-M Racing mass air meters for draw through or blow through application.
Complete assembled engine management harness. Many harness configurations available. The universal design of this harness allows you to enjoy all of the benefits of a high quality Mass Air engine management system, on virtually any engine, in any vehicle.
Eight high quality fuel injectors, sized to your application. The injectors are sized to allow ample room for large increases in horsepower. These fuel injectors are held to much closer tolerance than typical production injectors.
All needed sensors (air charge temperature sensor, two O2 sensors and bungs, throttle position sensor, mass air sensor and coolant temperature sensor). Most of the sensors are mounted right on the injection system for a simple install.
Utilizes your coil on plug ignition system!
Throttle body base gasket, throttle cable bracket, assorted hardware and fittings and detailed instructions for a simple turn key installation.
Professionally filmed step by step instructional videos featuring the inventor and head of the Pro-M EFI Research and Development Department.

All of these components are absolutely the best quality available. Unlike the competition, we will never sell you something that is "good enough" just because it costs less to produce.

Things You Will Need:

Intake Manifold Gaskets

Liquid Thread Sealer

Adhesive Caulk

Teflon Tape

Petroleum Jelly

190 - 195 Degree Thermostat

Vented Oil Cap

3" High Air Cleaner (If using the Pro-M On Throttle Body Mass Air Meter)

Torque Wrentch

Basic Hand Tools

1 1/4" Hole Saw

Fuel Supply System capable of 40 PSI with Return Line, Filter and Fuel Pressure Regulator (Available from Pro-M Racing in the options above)