3" WAVE Pro-Tube - FREQUENCY Style
The 3" WAVE Pro-Tube is a universal mass air meter for "Blow Through” applications in vehicles that require a frequency signal from the Mass Air Meter. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.
The 3" WAVE Pro-Tube is a universal mass air meter for "Blow Through” applications in vehicles that require a frequency signal from the Mass Air Meter. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.
These meters will not become a corroded eye sore like the competition's products. They are clear anodized for good looks for many years to come.
As with all Pro-M meters, the Pro-Tube is held to a tolerance of 2 percent. It has virtually unlimited horsepower potential.
Available for any application you choose.
Tuning is required when using a meter in a blow through application.
Wire Diagram:
Pin 1(F) = Not Used
Pin 2(E) = Intake Air Temperature (IAT)
Pin 3(D) = 12V Power
Pin 4(C) = Ground
Pin 5(B) = Mass Air Signal
Pin 6(A) = Not Used
Comes with a 40 point Transfer Function Sheet.
Featured | No |
---|