Methanol Nozzle Calculator
Welcome to the Promracing methanol nozzle calculator
Follow the steps below to select the correct nozzle(s) for your application.
Warning: The nozzle selection guide is just that... A guide. It was developed using information supplied to us by Snow Performance. It is the sole responsibility of the installer and/or tuner to decide what nozzle or nozzles are appropriate for the application. We accept no responsibility for any damage that may occur as a result of using this guide, or as a result of using this system in general.
Step 1:
Calculator
Calculator
Step 2:
Choose The Correct Nozzle Combination:
A) Single 625 Nozzle @ 1045ml/min
B) Two 625 Nozzles @ 2090ml/min total
C) Three 625 Nozzles @ 2670ml/min total
Choose The Correct Nozzle Combination:
A) Single 625 Nozzle @ 1045ml/min
B) Two 625 Nozzles @ 2090ml/min total
C) Three 625 Nozzles @ 2670ml/min total
Step 3:
Choose the correct tables for your nozzle section. The “Meth Pump Open Loop DC” table (the two column table) should be entered into your calibration exactly as shown. The “Meth Desired Flow Rate” table (3D table) is an example of how you might want to configure your table.
Choose the correct tables for your nozzle section. The “Meth Pump Open Loop DC” table (the two column table) should be entered into your calibration exactly as shown. The “Meth Desired Flow Rate” table (3D table) is an example of how you might want to configure your table.
Calibration tables for use with one (1) 625 Milliliter/min nozzle
Download the CSV file for a simple cut and paste into the Pro-M EFI software.
Calibration tables for use with two (2) 625 Milliliter/min nozzles
Download the CSV file for a simple cut and paste into the Pro-M EFI software.
Calibration tables for use with three (3) 625 Milliliter/min nozzles
Download the CSV file for a simple cut and paste into the Pro-M EFI software.
Return to Pro-M Racing ( promracing.com )