High Flow Flex Fuel Ethanol Content Sensor Assembly

$349.95
SKU
FFSENSOR

The Pro-M EFI High Flow Flex Fuel Sensor/Bypass Block assembly is designed to provide a compact and convenient method to add an alcohol content sensor to your fuel supply system without restricting fuel flow.

Conventional methods typically involve several fittings and hoses to bypass the fuel that cannot pass through the sensor via an alternate path. This is not only cumbersome, expensive and time consuming, but also ineffective, since there is no guarantee of a consistent sample of fuel through the sensor. The other typical method involves installing the sensor in the return line, which is even less effective.

The Pro-M EFI High Flow Flex Fuel Sensor/Bypass Block assembly is not only compact and easy to install, but also designed in such a way that it can out flow a -10 line, while providing an accurate alcohol content reading to the PCM.

Install the Pro-M EFI High Flow Flex Fuel Sensor/Bypass Block assembly anywhere in the feed line where space permits. There are four mounting holes that can be used to mount the assembly securely to the vehicle.

Fuel can pass through the sensor in either direction, so either port can be used as the inlet. The port size is -10 ORB. Use fittings that adapt -10 ORB to whatever line size you are using.

The Pro-M EFI High Flow Flex Fuel Sensor/Bypass Block assembly is designed to provide a compact and convenient method to add an alcohol content sensor to your fuel supply system without restricting fuel flow.

Conventional methods typically involve several fittings and hoses to bypass the fuel that cannot pass through the sensor via an alternate path. This is not only cumbersome, expensive and time consuming, but also ineffective, since there is no guarantee of a consistent sample of fuel through the sensor. The other typical method involves installing the sensor in the return line, which is even less effective.

The Pro-M EFI High Flow Flex Fuel Sensor/Bypass Block assembly is not only compact and easy to install, but also designed in such a way that it can out flow a -10 line, while providing an accurate alcohol content reading to the PCM.

Install the Pro-M EFI High Flow Flex Fuel Sensor/Bypass Block assembly anywhere in the feed line where space permits. There are four mounting holes that can be used to mount the assembly securely to the vehicle.

Fuel can pass through the sensor in either direction, so either port can be used as the inlet. The port size is -10 ORB. Use fittings that adapt -10 ORB to whatever line size you are using.

More Information
Featured Yes
Copyright © 2023 Mass-Flo EFI, Inc. & Pro-M Racing, Inc. All rights reserved. Mass-Flo EFI, Inc 77 Snow Road, West Brookfield, MA 01585