0 items: $0.00

Call Us:336.644.8668

Want to Run COIL ON PLUG Ignition?

Search results for 'on 3 performance'

Items 1 to 40 of 128 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction
  • Pro-M Racing 75mm Bullet

    75MM Plastic Bullet (un-flanged)

    The Pro-M 75mm unflanged Bullet is a direct replacement for the 88-93 5.0 Mustang (Fox Body / Third Generation), as well as any other Ford vehicle originally equipped with a 55 or 70mm unflanged Mass Air Meter housing.
    $209.99
  • 75mm Flanged Bullet

    75mm Flanged Bullet

    The Pro-M 75mm Flanged Bullet is a direct replacement for the 94-95 Mustang (Forth Generation / Fox-4 / SN-95), 94-96 5.0 and 5.8 trucks, and any other Ford vehicle originally equipped with a 70mm flanged housing. Learn More
    $209.99
  • Pro-M 80

    Pro-M 80

    The Pro-M 80mm High Flow Mass Air Meter is our flagship mass air meter. It is by far the most popular mass air meter ever offered. The Pro-M 80 is built out of a high quality polymer and shipped with it's lifetime filter. Watch a video of the Pro-M 80
    $309.99
  • Pro-M 92

    Pro-M 92

    The NEW Pro-M 92mm High Flow Mass Air Meter is the undisputed "Bad-Ass" of mass air meters. Now lighter, sleeker and shipped with it's lifetime filter. Watch a video of the Pro-M 92
    $394.99
  • 85MM Aluminum Flanged

    85MM Aluminum Flanged

    The 85mm Flanged Mass Air Meter is a direct replacement for the 80mm OEM meter found in 96-2004 Mustangs and 97-03 Ford trucks.
    $264.99
  • 95MM Aluminum Flanged

    95MM Aluminum Flanged

    The 95mm Flanged Mass Air Meter is a direct replacement for 03-04 Cobra Mustangs, 01-03 Lightning trucks, and Harley Davidson trucks. The 95mm can also be used in the 85mm applications.
    $294.99
  • 3" Pro-Tube

    3" Pro-Tube

    Pro-M Racing 3 inch Pro Tube


    The 3" Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.
    $314.99
  • 3.5" Pro-Tube

    3.5" Pro-Tube

    Pro-M Racing 3.5 inch Pro Tube


    The 3.5" Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body.
    $314.99
  • GM 75mm 3 Pin Meter

    GM 75mm 3 Pin Meter

    Pro-M Racing, LLC. mass air meters for GM applications appear to be exactly the same product that you see advertised elsewhere. All aftermarket manufactures (Pro-M Racing, LLC. included) start with the same production GM meter. The ends are removed from the production meters, then the center section (the part that contains the electronics) is machined to allow more air flow, then new larger diameter ends are installed. The result is an assembly that flows more air, but in the process, the calibration of the meter is thrown way off. Other manufacturers simply ship them with the calibration off. Every Pro-M Racing, LLC. meter is calibrated to match the original meter's calibration. These meters can simply be installed in place of your original meter, with no modification to the computer, allowing instant results, with none of the hassles associated with aftermarket computer tuning. This is a feature you will only find in a Pro-M Racing, LLC. meter. Every Pro-M mass air meter plugs into your vehicle's harness connector without modification

    $334.99
  • GM 85mm 5 Pin Meter

    GM 85mm 5 Pin Meter

    Pro-M Racing, LLC. mass air meters for GM applications appear to be exactly the same product that you have seen advertised by other manufactures. All aftermarket manufactures (Pro-M Racing, LLC. included) start with the same production GM meter. The entire housing is machined, allowing it to flow more air than the stock meter. This is where the similarities end. Modifying the meter housing allows the meter to flow more air, but in the process, the calibration of the meter is thrown way off.

    $334.99
  • 4 to 6 Pin Adapter

    4 to 6 Pin Adapter

    This adapter allows use of more modern mass air meters in earlier vehicles. One end connects to later model meters with 4 and 6 pin rectangular connectors. The other end connects to the 4 pin oval harness connector found in earlier Ford vehicles. This adapter is far superior, cleaner looking, and much more reliable than the goofy pigtail adapters offered by our competition.
  • Mass Air Conversion Harness

    Mass Air Conversion Harness

    The mass air conversion harness is a simple and economical way to convert 1986 through 1988 speed density Mustangs to mass air. Combine with one of our mass air meters, and a mass air computer for a complete conversion package.
    $49.99
  • Pro-M Slot Style Mass Air Sensor

    Pro-M Slot Style Mass Air Sensor

    Pro-M "Slot Style" Mass Air Sensor


    The Pro-M "Slot Style" mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
    $199.99
  • Pro-M Recalibration

    Pro-M Meter Recalibration

    If you are changing injector size, or installing your mass air meter into a different vehicle, you will need to get your meter recalibrated.


    Recalibrations are handled directly through Pro-M Racing. Please DO NOT send your meter to a distributor to be recalibrated.


    We WILL recalibrate any Pro-M meter, new or old. Older Pro-M meters will have "Pro-Flow" and/or "Professional Flow Technologies" on the lid. These are old Pro-M meters, and we DO offer recalibration for these.


    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.


    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.


    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.


    3) Ship your meter (the whole meter not just the electronic sensor) to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.








    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is unable to be recalibrated you will still be charged $50 for the testing unless you are purchasing a repair.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    $100.00
  • 6 to 6 pin Connector

    6 to 6 pin Connector

    Pro-M 6 to 6 pin Connector


    Allows use of any Pro-M meter (other than the Pro-M 80/92) in 2005 and newer ford vehicles without modifying the vehicle harness.


    Note: Not required for the Slot-In sensor.
    $49.99
  • 6 to 6 pin Connector with IAT

    6 to 6 pin Connector with IAT

    Pro-M 6 to 6 pin connector with IAT (Intake Air Temperature)



    Allows use of the Pro-M 80 / Pro-M 92 meters in any 2005 and newer Ford vehicles. This is a direct plug in. No need to modify the vehicle harness.

    Note: Requires use of external IAT sensor (Standard Motor Products part number AX31)
    $49.99
  • SCT BA 3000

    Recalibrations for Other Brands

    If you are changing injector size, or installing your mass air meter into a different vehicle, you will need to get your meter recalibrated.


    We will recalibrate any FORD, PMAS, BBK, Summit Racing, SCT and Sniper meter, new or old. Please Note we will NOT recalibrate C&L, Granatelli or Vortec meters.


    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.


    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.


    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.


    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.


    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.








    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is unable to be recalibrated you will still be charged $50 for the testing unless you are purchasing a repair.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    We do not warranty recalibrations for other brands!

    $150.00
  • Pro-M Meter Repair

    Pro-M Meter Repair

    If the electronics on your meter assembly are physically damaged, or are no longer working, you can send the meter in for repair. The electronics will be replaced and then calibrated for your application. If your electronics are functioning and you simply need a recalibration please, Click Here!



    Repairs are handled directly through Pro-M. Please DO NOT send your meter to a distributor to be repaired.



    We WILL Repair any Pro-M meter, new or old. Older Pro-M meters will have "Pro-Flow" and/or "Professional Flow Technologies" on the lid. These are old Pro-M meters, and we DO offer Repairs on these.



    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.



    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.



    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.



    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.









    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    $175.00
  • SCT BA 3000

    Repairs for Other Brands

    If the electronics on your meter assembly are physically damaged, or are no longer working, you can send the meter in for repair. The electronics will be replaced and then calibrated for your application. If your electronics are functioning and you simply need a recalibration please, Click Here!



    We will repair any FORD, PMAS, Granatelli, BBK, Summit Racing, SCT and Sniper meter, new or old. Please Note we will NOT repair C&L, Vortec or GM style meters meters.



    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.



    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.



    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.



    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.









    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    We do not warranty repairs for other brands!

    $200.00
  • 1000 CFM Throttle Body with TPS

    1000 CFM Throttle Body with TPS

    1000 CFM 4 bbl throttle body. It features all aluminum and stainless steel construction, sealed ball bearings on the throttle shafts, and progressive linkage.


    Comes complete with idle control motor and throttle position sensor. This is absolutely the finest 4 bbl throttle body on the market!
    $549.99
  • Pro-M Conical Filter for 75mm Bullet

    Pro-M Conical Bullet Filter

    This is the high flow conical air filter for the 75mm Plastic Bullet and the 75mm Chrome Bullet.
    $44.99
  • Throttle Position Sensor

    Throttle Position Sensor (TPS)

    A throttle position sensor (TPS) is a sensor used to monitor the position of the throttle in an internal combustion engine. The sensor is usually located on the butterfly spindle so that it can directly monitor the position of the throttle valve butterfly.
    $39.99
  • Engine Coolant Temperature

    Engine Coolant Temperature (ECT) Sensor

    The Engine Coolant Temperature (ECT) Sensor is a thermal transistor. Because the ECT is in direct contact with the engine coolant flow it changes resistance in response to the temperature of that coolant.
    $24.99
  • Air Charge Temperature Sensor

    Air Charge Temperature Sensor (ACT)

    The Air Charge Temperature (ACT) Sensor is a thermal transistor. Because the ACT is mounted into the incoming air stream it changes resistance in response to the temperature of that air.
    $24.99
  • O2 Sensor Weld on Bungs - Exhaust

    O2 Sensor Weld on Bungs - Exhaust

    These bungs are made to be welded on your exhaust system for proper fit and seal of the O2 Sensors.
    $9.99
  • Idle Air Control Valve

    Idle Air Control Valve (IAC)

    Idle Air Control (IAC) valves help you get maximum fuel efficiency and power from your engine. A properly operating idle air control valve is an essential component to helping your vehicle run flawlessly.
    $64.99
  • Walbro 255 Liter per Hour External Fuel Pump

    Walbro 255 Liter per Hour External Fuel Pump

    These Walbro high pressure inline fuel pumps have a lightweight compact design that fits most EFI applications including turbo and supercharged, and are QS9000 certified. They're ideal as a universal fuel pump for replacement, racing, or for performance purposes where higher pressure fuel is necessary.


    So when it comes to your fuel delivery needs, you can depend on Walbro!
    $199.99
  • Pro-M Cold Air Screen

    Pro-M Cold Air Screen

    Pro-M Mass Air Meter Screen used for Cold Air Calibrations. This screen does not create a "Cold Air Calibration".


    Note: This is a replacement only
    $39.95

Items 1 to 40 of 128 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Descending Direction