0 items: $0.00

Call Us:336.644.8668

Want to Run COIL ON PLUG Ignition?

Search results for 'cold air intake faq'

Items 41 to 80 of 85 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction
  • MTX Series Digital Air/Fuel Ratio Gauge Kit

    Innovate Motorsports MTX-L Plus Digital Air/Fuel Ratio Gauge Kit (ALL-IN-ONE) (8 Ft. Sensor Cable)

    Innovate Motorsports MTX-L Plus: These wide band O2 sensors operate over a much broader range of Air/Fuel ratio than the conventional O2 sensors, which allows for more precise fuel control over a broader range of operating conditions. They are worth the money. You'll find that the Pro-M EFI harness has a connector dedicated to wiring for the wide bands. And if you purchase the wide bands as part of your EFI package, you'll get a harness pigtail that plugs into the harness, and makes wiring the wide bands a snap.


    This is a single O2 kit.
    $225.99
  • Pro-M FORD 6.0L Diesel Sensor

    Pro-M FORD 6.0L Diesel Sensor

    The Pro-M 2003 - 2007 FORD 6.0L Diesel Sensor was designed to break through the limitations of the stock sensor. When used in the stock air housing you will quickly realize and increase in throttle response (less turbo lag), increase in Miles Per Gallon (MPG) and increased torque. Learn More
    $199.99
  • 3.5" WAVE Pro-Tube

    3.5" WAVE Pro-Tube - FREQUENCY Style

    Pro-M Racing 3.5 inch WAVE Pro-Tube


    The 3.5" WAVE Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.

    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $374.99
  • 3" WAVE Pro-Tube

    3" WAVE Pro-Tube - FREQUENCY Style

    Pro-M Racing 3 inch WAVE Pro Tube


    The 3" WAVE Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.

    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $374.99
  • Pro-M 117 Conical Filter

    Pro-M 117MM Filter

    This is the high flow conical air filter for the Pro-M 117mm Mass Air Flow Meter.
    $74.99
  • 3.5" Slot Style Pro-Tube

    3.5" Slot Style Pro-Tube

    Pro-M Racing 3.5 inch Slot Style Pro Tube is capable of handling 1100 flywheel HP.


    The 3.5" Slot Style Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" Slot Style Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.


    The Pro-M 3.5" Slot Style Pro-Tube mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
  • 3" Slot Style Pro-Tube

    3" Slot Style Pro-Tube

    Pro-M Racing 3 inch Slot Style Pro Tube is capable of handling 800 flywheel HP.


    The 3" Slot Style Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" Slot Style Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.


    The Pro-M 3.5" Slot Style Pro-Tube mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
  • Pro-M 117 with conical filter

    Pro-M 117

    New Design Coming Mid May!


    The Pro-M 117mm High Flow Mass Air Meter is the "LARGEST" mass air meter made. With a bell mouth inlet and 5 inch outlet, nothing comes close! Forged out of high quality cast aluminum and shipped with it's lifetime filter. Used by Stuska Dynamometers around the country! Watch a video of the Pro-M 117
    $419.99
  • Pro-M Wave for 2011 - 2018 Fords - Frequency Type Sensor

    Pro-M Wave for 2011 - 2018 Fords - Frequency Type Sensor

    Introducing the all new PRO-M WAVE!


    The PRO-M WAVE is the newest creation in after market Mass Air Sensors by Pro-M Racing. If you are looking for versatility, performance, accuracy and quality then the PRO-M WAVE is what you have been looking for.


    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $299.99
  • Pro-M WAVE Frequency Sensor Wiring Pigtail

    Pro-M WAVE Frequency Sensor Wiring Pigtail

    Pro-M WAVE Frequency Sensor Wiring Pigtail (4 Pin)
    $39.95
  • Pro-M Cold Air Screen

    Pro-M Cold Air Screen

    Pro-M Mass Air Meter Screen used for Cold Air Calibrations. This screen does not create a "Cold Air Calibration".


    Note: This is a replacement only
    $39.95
  • Idle Air Control Valve

    Idle Air Control Valve (IAC)

    Idle Air Control (IAC) valves help you get maximum fuel efficiency and power from your engine. A properly operating idle air control valve is an essential component to helping your vehicle run flawlessly.
    $64.99
  • Air Charge Temperature Sensor

    Air Charge Temperature Sensor (ACT)

    The Air Charge Temperature (ACT) Sensor is a thermal transistor. Because the ACT is mounted into the incoming air stream it changes resistance in response to the temperature of that air.
    $24.99
  • Pro-M Conical Filter for 75mm Bullet

    Pro-M Conical Bullet Filter

    This is the high flow conical air filter for the 75mm Plastic Bullet and the 75mm Chrome Bullet.
    $44.99
  • SCT BA 3000

    Repairs for Other Brands

    If the electronics on your meter assembly are physically damaged, or are no longer working, you can send the meter in for repair. The electronics will be replaced and then calibrated for your application. If your electronics are functioning and you simply need a recalibration please, Click Here!



    We will repair any FORD, PMAS, Granatelli, BBK, Summit Racing, SCT and Sniper meter, new or old. Please Note we will NOT repair C&L, Vortec or GM style meters meters.



    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.



    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.



    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.



    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.









    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    We do not warranty repairs for other brands!

    $200.00
  • Pro-M Meter Repair

    Pro-M Meter Repair

    If the electronics on your meter assembly are physically damaged, or are no longer working, you can send the meter in for repair. The electronics will be replaced and then calibrated for your application. If your electronics are functioning and you simply need a recalibration please, Click Here!



    Repairs are handled directly through Pro-M. Please DO NOT send your meter to a distributor to be repaired.



    We WILL Repair any Pro-M meter, new or old. Older Pro-M meters will have "Pro-Flow" and/or "Professional Flow Technologies" on the lid. These are old Pro-M meters, and we DO offer Repairs on these.



    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.



    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.



    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.



    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.









    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    $175.00
  • SCT BA 3000

    Recalibrations for Other Brands

    If you are changing injector size, or installing your mass air meter into a different vehicle, you will need to get your meter recalibrated.


    We will recalibrate any FORD, PMAS, BBK, Summit Racing, SCT and Sniper meter, new or old. Please Note we will NOT recalibrate C&L, Granatelli or Vortec meters.


    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.


    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.


    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.


    3) Ship your meter to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.


    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.








    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is unable to be recalibrated you will still be charged $50 for the testing unless you are purchasing a repair.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    We do not warranty recalibrations for other brands!

    $150.00
  • Drop-In Sensor Weld-On Flange

    Drop-In Sensor Weld-On Flange

    Use this weld on flange with our Drop-In sensor to create your own custom mass air meter assembly.


    Available in either steel or aluminum (choose below). The new assembly will need to be shipped to us for proper calibration. See our Meter Recalibration page for more information.

    $49.99
  • Pro-M Drop-In Sensor

    Pro-M Drop-In Sensor

    Use the Pro-M Drop-In Sensor with our Drop-In Weld-On Flange to create your own custom mass air meter assembly. The perfect option for customers with custom tubes or forced induction! Learn More
    $174.95
  • Slot Style Sensor Weld-On Flange

    Slot Style Sensor Weld-On Flange

    Use the Pro-M Slot Style weld-on flange with the Pro-M Slot Style mass air sensor. Available in either steel or aluminum (Choose below).


    The Pro-M weld-on flange will also fit most competitor's knock off versions of the Pro-M Slot Style mass air sensor.

    $49.99
  • 6 to 6 pin Connector with IAT

    6 to 6 pin Connector with IAT

    Pro-M 6 to 6 pin connector with IAT (Intake Air Temperature)



    Allows use of the Pro-M 80 / Pro-M 92 meters in any 2005 and newer Ford vehicles. This is a direct plug in. No need to modify the vehicle harness.

    Note: Requires use of external IAT sensor (Standard Motor Products part number AX31)
    $49.99
  • Pro-M Recalibration

    Pro-M Meter Recalibration

    If you are changing injector size, or installing your mass air meter into a different vehicle, you will need to get your meter recalibrated.


    Recalibrations are handled directly through Pro-M Racing. Please DO NOT send your meter to a distributor to be recalibrated.


    We WILL recalibrate any Pro-M meter, new or old. Older Pro-M meters will have "Pro-Flow" and/or "Professional Flow Technologies" on the lid. These are old Pro-M meters, and we DO offer recalibration for these.


    Please follow these simple steps very carefully to ensure a 1-2 day turn around on your meter.


    1) Fill out this form completely, add it to your cart and checkout! The shipping charge that is added to this order is for the return shipping. All orders are shipped UPS ground unless you choose an expedited method.


    2) An order confirmation will be emailed to you. Print the order confirmation and put it in the box with your meter.


    3) Ship your meter (the whole meter not just the electronic sensor) to Pro-M Racing, 77 Snow Road, West Brookfield MA, 01585 - Please remember to put the order confirmation in the box. DO NOT ship with "signature required". DO NOT use packing peanuts. Please keep your tracking number so you will know when we receive your meter. Please DO NOT call and ask if your meter was received.



    4) You will receive a UPS tracking number after checkout. Use this tracking number to see when your meter is completed and is on its way back to you. Please DO NOT call and ask if your meter was shipped.








    PLEASE MAKE SURE TO SEND THE ENTIRE METER ASSEMBLY - SENSOR, HOUSING AND CONICAL FILTER IF APPLICABLE!
    * Failure to follow these instructions will cause delays in the return of your meter.

    If your meter is unable to be recalibrated you will still be charged $50 for the testing unless you are purchasing a repair.

    If your meter is left at Pro-M for greater than 30 days with no response to our emails or calls it will be considered abandoned and disposed of.

    $100.00
  • Pro-M Slot Style Mass Air Sensor

    Pro-M Slot Style Mass Air Sensor

    Pro-M "Slot Style" Mass Air Sensor


    The Pro-M "Slot Style" mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
    $199.99
  • Pro-M 92 Conical Filter

    Pro-M 92MM Filter

    This is the high flow conical air filter for the Pro-M 92MM Mass Air Flo Meter.
    $54.99
  • Pro-M 80 Conical Filter

    Pro-M 80MM Filter

    This is the high flow conical air filter for the Pro-M 80MM Mass Air Flo Meter.
    $54.99
  • Mass Air Conversion Harness

    Mass Air Conversion Harness

    The mass air conversion harness is a simple and economical way to convert 1986 through 1988 speed density Mustangs to mass air. Combine with one of our mass air meters, and a mass air computer for a complete conversion package.
    $49.99
  • 4 to 6 Pin Adapter

    4 to 6 Pin Adapter

    This adapter allows use of more modern mass air meters in earlier vehicles. One end connects to later model meters with 4 and 6 pin rectangular connectors. The other end connects to the 4 pin oval harness connector found in earlier Ford vehicles. This adapter is far superior, cleaner looking, and much more reliable than the goofy pigtail adapters offered by our competition.
  • GM 85mm 5 Pin Meter

    GM 85mm 5 Pin Meter

    Pro-M Racing, LLC. mass air meters for GM applications appear to be exactly the same product that you have seen advertised by other manufactures. All aftermarket manufactures (Pro-M Racing, LLC. included) start with the same production GM meter. The entire housing is machined, allowing it to flow more air than the stock meter. This is where the similarities end. Modifying the meter housing allows the meter to flow more air, but in the process, the calibration of the meter is thrown way off.

    $334.99
  • GM 75mm 3 Pin Meter

    GM 75mm 3 Pin Meter

    Pro-M Racing, LLC. mass air meters for GM applications appear to be exactly the same product that you see advertised elsewhere. All aftermarket manufactures (Pro-M Racing, LLC. included) start with the same production GM meter. The ends are removed from the production meters, then the center section (the part that contains the electronics) is machined to allow more air flow, then new larger diameter ends are installed. The result is an assembly that flows more air, but in the process, the calibration of the meter is thrown way off. Other manufacturers simply ship them with the calibration off. Every Pro-M Racing, LLC. meter is calibrated to match the original meter's calibration. These meters can simply be installed in place of your original meter, with no modification to the computer, allowing instant results, with none of the hassles associated with aftermarket computer tuning. This is a feature you will only find in a Pro-M Racing, LLC. meter. Every Pro-M mass air meter plugs into your vehicle's harness connector without modification

    $334.99
  • 3.5" Pro-Tube

    3.5" Pro-Tube

    Pro-M Racing 3.5 inch Pro Tube


    The 3.5" Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body.
    $314.99
  • 3" Pro-Tube

    3" Pro-Tube

    Pro-M Racing 3 inch Pro Tube


    The 3" Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.
    $314.99
  • 95MM Aluminum Flanged

    95MM Aluminum Flanged

    The 95mm Flanged Mass Air Meter is a direct replacement for 03-04 Cobra Mustangs, 01-03 Lightning trucks, and Harley Davidson trucks. The 95mm can also be used in the 85mm applications.
    $294.99

Items 41 to 80 of 85 total

per page
Page:
  1. 1
  2. 2
  3. 3

Grid  List 

Set Ascending Direction