0 items: $0.00

Call Us:336.644.8668

Want to Run COIL ON PLUG Ignition?

Search results for 'on 3 performance'

Items 41 to 80 of 128 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction
  • Pro-M EFI Universal Hotrod Engine Management Computer

    Pro-M EFI Universal Hotrod Engine Management System


    Any Engine, Any Car!

    The all new Pro-M EFI Engine Management System includes our new fully programmable Pro-M EFI processor, tuning software, USB connection for laptop tuning and universal engine management harness. Learn more . . .
    $1,999.95
  • 351W Efi System by Pro-M Racing

    351 Windsor Complete Mass Air Sequential Port EFI System


    The Pro-M EFI 351 Windsor Complete Mass Air Sequential Port EFI System is hands down the best aftermarket EFI system in the industry! Featuring the all new programmable Pro-M EFI Engine Management Computer! Learn More

    Regular Price: $4,249.95

    Special Price $3,995.95

    As low as: $3,595.95
  • MTX Series Digital Air/Fuel Ratio Gauge Kit

    Innovate Motorsports MTX-L Plus Digital Air/Fuel Ratio Gauge Kit (ALL-IN-ONE) (8 Ft. Sensor Cable)

    Innovate Motorsports MTX-L Plus: These wide band O2 sensors operate over a much broader range of Air/Fuel ratio than the conventional O2 sensors, which allows for more precise fuel control over a broader range of operating conditions. They are worth the money. You'll find that the Pro-M EFI harness has a connector dedicated to wiring for the wide bands. And if you purchase the wide bands as part of your EFI package, you'll get a harness pigtail that plugs into the harness, and makes wiring the wide bands a snap.


    This is a single O2 kit.
    $225.99
  • Pro-M FORD 6.0L Diesel Sensor

    Pro-M FORD 6.0L Diesel Sensor

    The Pro-M 2003 - 2007 FORD 6.0L Diesel Sensor was designed to break through the limitations of the stock sensor. When used in the stock air housing you will quickly realize and increase in throttle response (less turbo lag), increase in Miles Per Gallon (MPG) and increased torque. Learn More
    $199.99
  • /

    Shipping Adjustment

    Shipping Adjustment for those that have changed their shipping information
    $50.00
  • Recalibration Adjustment

    Recalibration Adjustment

    Recalibration Adjustment for those that have filled out the wrong recalibration form.
    $50.00
  • Walbro 255 Liter per Hour Internal Fuel Pump with Tray

    Walbro 255 Liter per Hour Internal Fuel Pump with Tray

    Walbro 255 Liter per Hour Internal Fuel Pump with Tray
    $249.99
  • 3.5" WAVE Pro-Tube

    3.5" WAVE Pro-Tube - FREQUENCY Style

    Pro-M Racing 3.5 inch WAVE Pro-Tube


    The 3.5" WAVE Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.

    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $374.99
  • 3" WAVE Pro-Tube

    3" WAVE Pro-Tube - FREQUENCY Style

    Pro-M Racing 3 inch WAVE Pro Tube


    The 3" WAVE Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.

    The Pro-M WAVE style sensors comes with a 30 point transfer function sheet at NO additional charge!
    $374.99
  • Pro-M 117 Conical Filter

    Pro-M 117MM Filter

    This is the high flow conical air filter for the Pro-M 117mm Mass Air Flow Meter.
    $74.99
  • 3.5" Slot Style Pro-Tube

    3.5" Slot Style Pro-Tube

    Pro-M Racing 3.5 inch Slot Style Pro Tube is capable of handling 1100 flywheel HP.


    The 3.5" Slot Style Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" Slot Style Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.


    The Pro-M 3.5" Slot Style Pro-Tube mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!
  • 3" Slot Style Pro-Tube

    3" Slot Style Pro-Tube

    Pro-M Racing 3 inch Slot Style Pro Tube is capable of handling 800 flywheel HP.


    The 3" Slot Style Pro-Tube is a universal mass air meter for "Blow Through" applications. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3" Slot Style Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal.


    The Pro-M 3.5" Slot Style Pro-Tube mass air sensor used in all 05 and up voltage based Ford products. It can also be used in any voltage based vehicle and comes with a 30 point transfer function sheet at NO additional charge!

Items 41 to 80 of 128 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4

Grid  List 

Set Ascending Direction