3.5" WAVE Pro-Tube - FREQUENCY Style

$374.99
SKU
35WAVE

The 3.5" WAVE Pro-Tube is a universal mass air meter for "Blow Through applications in vehicles that require a frequency signal from the Mass Air Meter. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal. 

The 3.5" WAVE Pro-Tube is a universal mass air meter for "Blow Through applications in vehicles that require a frequency signal from the Mass Air Meter. It simply becomes a part of the duct work between the supercharger (or turbocharger) and the throttle body. The 3.5" WAVE Pro-Tube features welded construction (no cheesy rivets!). The ends are bead rolled for a positive seal. 

These meters will not become a corroded eye sore like the competition's products. They are clear anodized for good looks for many years to come. 

As with all Pro-M meters, the Pro-Tube is held to a tolerance of 2 percent. It has virtually unlimited horsepower potential. 

Available for any application you choose. 

Tuning is required when using a meter in a blow through application. 

Wire Diagram: 
Pin 1(F) = Not Used 
Pin 2(E) = Intake Air Temperature (IAT) 
Pin 3(D) = 12V Power 
Pin 4(C) = Ground 
Pin 5(B) = Mass Air Signal 
Pin 6(A) = Not Used 

Comes with a 30 point Transfer Function Sheet.

Copyright © 2005-present Mass-Flo EFI, Inc. & Pro-M Racing, Inc. All rights reserved. Mass-Flo EFI, Inc 77 Snow Road, West Brookfield, MA 01585